Installed software

Drinking from the Firehose

For a complete list of all installed software, see NodePackageList

Most Commonly Used Software

OpenMPI

Version 1.4.3

Scilab

Version 5.4.0

R

Version 3.0.3

Modules

We provide a small number of R modules installed by default, these are generally modules that are needed by more than one person.

Installing your own modules

To install your own module, login to Beocat and start R interactively

R

Then install the package using

install.packages("PACKAGENAME")

Follow the prompts. Note that there is a CRAN mirror at KU - it will be listed as "USA (KS)".

After installing you can test before leaving interactive mode by issuing the command

library("PACKAGENAME")

Running R Jobs

You cannot submit an R script directly. 'qsub myscript.R' will result in an error. Instead, you need to make a bash script that will call R appropriately. Here is a minimal example. We'll save this as submit-R.qsub

#!/bin/bash
# First, lets tell the qsub command which resources we need
# lets start with memory (in this case I ask for 1 gigabyte).
# For help on these, see SGEBasics

#$ -l mem=1G
# Now we tell qsub how long we expect our work to take: 15 minutes (H:MM:SS)

#$ -l h_rt=0:15:00

# Lets output a little useful information This will put something like "Starting the job at: Thu Jan 26 10:43:26 CST 2012" in your output file
echo -n "Starting the job at: "
date

# Now lets do some actual work. A lot of our users use R, so we'll go over that
# This starts R and loads the file myscript.R
R --no-save -q < myscript.R

# like before, this is just useful information
echo -n "Ending the job at: "
date

Now, to submit your R job, you would type

qsub submit-R.qsub

Java

Versions 1.6 and 1.7

We support 4 versions of the Java VM on Beocat. IcedTea 6 and 7 (based on OpenJDK), Sun JDK 1.6 (Java 6), and Oracle JDK 1.7 (Java 7).

We allow each user to select his or her Java version individually. If you do not select one, we default to Sun JDK 1.7.

Selecting your Java version

First, lets list the available versions. This can be done with the command eselect java-vm list

% eselect java-vm list
Available Java Virtual Machines:
  [1]   icedtea-bin-6
  [2]   icedtea-bin-7
  [3]   oracle-jdk-bin-1.7  system-vm
  [4]   sun-jdk-1.6

If you'll note, oracle-jdk-bin-1.7 (marked "system-vm") is the default for all users. If you have a custom version set, it will be marked with "user-vm". Now if you wanted to use icedtea-6, you could run the following:

eselect java-vm set user 1

Now, we see the difference when running the above command

% eselect java-vm list
Available Java Virtual Machines:
  [1]   icedtea-bin-6  user-vm
  [2]   icedtea-bin-7
  [3]   oracle-jdk-bin-1.7  system-vm
  [4]   sun-jdk-1.6

To verify you are seeing the correct java, you can run java -version

% java -version
java version "1.6.0_27"
OpenJDK Runtime Environment (IcedTea6 1.12.7) (Gentoo build 1.6.0_27-b27)
OpenJDK 64-Bit Server VM (build 20.0-b12, mixed mode)

Python

We have several versions of Python available:

• CPython 2.7
• CPython 3.2
• PyPy versions 1.9 (Python 2.7.2) and 2.0.2 (Python 2.7.3)

For the uninitiated PyPy provides just-in-time compilation for python code. While it doesn't support all modules, code which does run under PyPy can see a significant performance increase.

If you just need python and its default modules, you can use python2 python3 pypy-c1.9 or pypy-c2.0 as you would any other application.

If, however, you need modules that we do not have installed, you should use virtualenvwrapper to setup a virtual python environment in your home directory. This will let you install python modules as you please.

Setting up your virtual environment

• Change your shell to bash
• Make sure ~/.bash_profile exists

if [ ! -f ~/.bash_profile ]; then cp /etc/skel/.bash_profile ~/.bash_profile; fi

• Add a line like source /usr/bin/virtualenvwrapper.sh to your .bash_profile.

echo "source /usr/bin/virtualenvwrapper.sh" >> ~/.bash_profile

• Show your existing environments

workon

• Create a virtual environment. Here I will create a default virtual environment called 'test', a python2 virtual environment called 'testp2', a python3 virtual environment called 'testp3', and a pypy environment called testpypy. Note that mkvirtualenv --help has many more useful options.

mkvirtualenv -p $(which python2) testp2
mkvirtualenv -p $(which python3) testp3
mkvirtualenv -p $(which pypy-c2.0) testpypy

• Lets look at our virtual environments

%workon
testp2
testp3
testpypy

• Activate one of these

%workon testp2

• You can now install the python modules you want. This can be done using pip.

pip install numpy biopython

Using your virtual environment within a job

Here is a simple job script using the virtual environment testp2

#!/bin/bash
source /usr/bin/virtualenvwrapper.sh
workon testp2
~/path/to/your/python/script.py

A note on NumPy

NumPy is a commonly-used Python package.

Make sure the following is executed before running pip install numpy

cp /opt/beocat/numpy/.numpy-site.cfg ~/.numpy-site.cfg

Perl

The system-wide version of perl is tracking the stable releases of perl. Unfortunately there are some features that we do not include in the system distribution of perl, namely threads.

Getting Perl with threads

• Setup perlbrew
  • Change your shell to bash
  • Install perlbrew

curl -L http://install.perlbrew.pl | bash

• • Make sure that ~/.bash_profile exists

if [ ! -f ~/.bash_profile ]; then cp /etc/skel/.bash_profile ~/.bash_profile; fi

• • Add source ~/perl5/perlbrew/etc/bashrc to ~/.bash_profile

echo "source ~/perl5/perlbrew/etc/bashrc" >> ~/.bash_profile

• • Then source your bash profile

source ~/.bash_profile

• Now, install perl with threads within perlbrew
  • Find the current Perl version.

% perl -version

This is perl 5, version 16, subversion 3 (v5.16.3) built for x86_64-linux
(with 22 registered patches, see perl -V for more detail)
(...several more lines deleted)

• • In this case the version is 5.16.3, so we run

perlbrew install -f -n -D usethreads perl-5.16.3

• • To temporarily use the new version of perl in the current shell, we now run

perlbrew use perl-5.16.3

• • To switch versions of perl for every new login or job, run

perlbrew switch perl-5.16.3

• • You can reverse this switch with

perlbrew switch-off

Installing my own software

Installing and maintaining software for the many different users of Beocat would be very difficult, if not impossible. For this reason, we don't generally install user-run software on our cluster. Instead, we ask that you install it into your home directories.

In many cases, the software vendor or support site will incorrectly assume that you are installing the software system-wide or that you need 'sudo' access.

As a quick example of installing software in your home directory, we have a sample video on our Training_Videos page. If you're still having problems or questions, please contact support as mentioned on our Main_Page.