|
|
| (10 intermediate revisions by 2 users not shown) |
| Line 1: |
Line 1: |
| == Submitting your first job == | | == SGE is gone, long live [[SlurmBasics|slurm]] == |
| To submit a job to run under SGE, we use the <code>qsub</code> command. qsub (queue submit) takes the commands you give it, and runs it through the scheduler, which finds the optimum place for your job to run. With over 150 nodes and 2500 cores to schedule, as well as differing priorities, hardware, and individual resources, the scheduler's job is not trivial.
| |
| | |
| There are a few things you'll need to know before running qsub.
| |
| * How many cores you need. Note that unless your program is created to use multiple cores (called "threading"), asking for more cores will not speed up your job. This is a common misperception. '''Beocat will not magically make your program use multiple cores!''' For this reason the default is 1 core.
| |
| * How much time you need. Many users when beginning to use Beocat neglect to specify a time requirement. The default is one hour, and we get asked why their job died after one hour. We usually point them to the [[FAQ]].
| |
| * How much memory you need. The default is 1GB. If your job uses significantly more than you ask, your job will be placed on hold until you fix your request.
| |
| * Any advanced options. See the [[AdvancedSGE]] page for these requests. For our basic examples here, we will ignore these.
| |
| | |
| So let's now create a small script to test our ability to submit jobs. Create the following file (either by copying it to Beocat or by editing a text file and we'll name it <code>myhost.sh</code>. Both of these methods are documented on our [[LinuxBasics]] page.
| |
| <syntaxhighlight lang="bash" line>
| |
| #!/bin/sh
| |
| hostname
| |
| </syntaxhighlight>
| |
| | |
| Be sure to make it executable
| |
| chmod u+x myhost.sh
| |
| | |
| Now, let's first run it on the headnode. As I write this, I'm logged into the headnode named 'minerva'. When I run it, it looks like this:
| |
| % ./myhost.sh
| |
| minerva
| |
| | |
| So, now lets submit it as a job and see what happens. Here I'm going to use three options
| |
| * <code>-l mem=</code> tells how much memory I need. In my example, I'm using our system minimum of 512 MB, which is more than enough. Note that your memory request is '''per core''', which doesn't make much difference for this example, but will as you submit more complex jobs.
| |
| * <code>-l h_rt=</code> tells how much runtime I need. This can be in the form of ''seconds'', or ''hours'':''minutes'':''seconds''. This is a very short job, so 60 seconds should be plenty. Note that if you submit a job that needs to run for days or weeks, you'll need to translate that into hours. This can't be changed after the job is started please make sure you have requested a sufficient amount of time.
| |
| * <code>-pe single 1</code> tells SGE that I need only a single core on one machine. The [[AdvancedSGE]] page has much more on the "Parallel Environment" switch.
| |
| | |
| % '''ls'''
| |
| myhost.sh
| |
| % '''qsub -l h_rt=60 -l mem=512M -pe single 1 ./myhost.sh'''
| |
| INFO: Requested resources for this job: pe=single cores=1 time(HH:MM:SS or SS)=60 mem(per-core)=512M
| |
| Your job 1483446 ("myhost.sh") has been submitted
| |
| | |
| Since this is such a small job, it is likely to be scheduled almost immediately, so a minute or so later, I now see
| |
| % '''ls'''
| |
| myhost.sh
| |
| myhost.sh.po1483446
| |
| myhost.sh.pe1483446
| |
| myhost.sh.e1483446
| |
| myhost.sh.o1483446
| |
| | |
| The four additional files that were created are in the form ''scriptname''.''XX''.''jjjjjjj'' - where ''scriptname'' is the script you submitted, ''XX'' is 'po' (parallel output), 'pe' (parallel error), 'e' (error), or 'o' (output), and ''jjjjjjj'' is the job number (which is given when you submitted your job, in this case 1483446).
| |
| | |
| If everything goes as planned, the po, pe, and e jobs will be blank...
| |
| % '''cat myhost.sh.po1483446'''
| |
| % '''cat myhost.sh.pe1483446'''
| |
| % '''cat myhost.sh.e1483446'''
| |
| ...and the .o file will show the hostname of the node that ran the job...
| |
| % '''cat myhost.sh.o1483446'''
| |
| mage03
| |
| | |
| So we can see that this job ran on host 'mage03'.
| |
| | |
| == Monitoring Your Job ==
| |
| Now that you've submitted your job, you're probably curious about when it will start. The easiest tool for this is the '<code>status</code>' command. By default this command will give you all of your queued and running jobs. If you have no jobs in the queue or running, it will simply quit with no output.
| |
| | |
| % status
| |
| Running jobs for user: kylehutson
| |
| job-ID # name start time running in
| |
| -------------------------------------------------------------------
| |
| 1550047 1 test1.sh 05/22/2014 16:09:34 batch.q
| |
|
| |
| Waiting jobs for user: kylehutson
| |
| job-ID # name submit time
| |
| --------------------------------------------------------
| |
| 1550048 80 test2.sh 05/22/2014 16:09:33
| |
| | |
| As you can see, this gives the start time for running jobs and submit time for jobs that have not yet started. You can use the '<code>-r</code>' switch to view a relative time.
| |
| | |
| % status -r
| |
| Running jobs for user: kylehutson
| |
| job-ID # name start time running in
| |
| -------------------------------------------------------------------
| |
| 1550047 1 test1.sh -0d 00:00:27 batch.q
| |
|
| |
| Waiting jobs for user: kylehutson
| |
| job-ID # name submit time
| |
| --------------------------------------------------------
| |
| 1550049 80 test2.sh -0d 00:00:03
| |
| | |
| That leaves you with the question, though - when will my waiting job start? We can't really give an absolute answer to that question, but we can show you where you stand relative to others. The tool for this is '<code>qstat</code>'.
| |
| | |
| Here is an edited version (just for space sake) of the jobs on Beocat at the time I'm writing this.
| |
| % qstat 0 4:10PM
| |
| job-ID prior name user state submit/start at queue slots ja-task-ID
| |
| -----------------------------------------------------------------------------------------------------------------
| |
| 1437729 0.25310 couplings emilieg Rr 04/22/2014 17:22:15 highmem.q@mage11.beocat 60
| |
| 1457075 0.20816 au9_D2H_MC nvkarimova r 04/30/2014 11:29:03 highmem.q@mage07.beocat 40
| |
| 1457078 0.20815 au8_C3V_MC nvkarimova r 05/03/2014 04:25:42 highmem.q@mage09.beocat 40
| |
| 1460509 0.17885 MF_ncbd1 khlee r 04/30/2014 11:13:22 long.q@scout64.beocat 16
| |
| 1478510 0.13297 TDSE4.scri huiwei r 05/05/2014 19:01:53 highmem.q@mage09.beocat 1
| |
| 1478511 0.13297 TDSE5.scri huiwei r 05/05/2014 19:01:53 highmem.q@mage09.beocat 1
| |
| 1488568 0.08904 F_ncbd_270 khlee r 05/15/2014 16:55:20 batch.q@elf61.beocat 24
| |
| 1488553 0.83423 p.1bxl.10 beugels2 r 05/12/2014 16:08:16 batch.q@elf29.beocat 8
| |
| [...]
| |
| 1550045 0.00093 cufflinks_ wrutter r 05/22/2014 15:33:56 long.q@paladin12.beocat 4
| |
| 1541856 0.35737 l149h mmohan qw 05/20/2014 11:53:32 8 1
| |
| 1541857 0.35466 l149h mmohan qw 05/20/2014 11:53:34 8 1
| |
| 1541858 0.35199 l149h mmohan qw 05/20/2014 11:53:36 8 1
| |
| [...]
| |
| 1541888 0.31023 p.1zy3.43 beugels2 qw 05/20/2014 12:13:38 8
| |
| 1549982 0.29499 p.1g5j.30 beugels2 qw 05/22/2014 05:25:02 8
| |
| 1532569 0.04061 H9_310_Bil zhiguang qw 05/18/2014 16:50:14 32
| |
| 1549979 0.03024 zzz_bwrang blkpawn qw 05/21/2014 23:58:40 80 8-36:1
| |
| 1549937 0.02694 Mira_denov wrutter qw 05/21/2014 14:15:14 60
| |
| 1549989 0.02647 zzz_bwrcor blkpawn qw 05/22/2014 11:43:19 80 1-3:1
| |
| 1451971 0.02127 run.sh zhangs84 hRq 04/25/2014 18:54:21 1
| |
| 1549913 0.01965 H9_298_Mle zhiguang qw 05/21/2014 10:03:42 32
| |
| 1549914 0.01965 H9_310_Ml2 zhiguang qw 05/21/2014 10:04:29 32
| |
| 1549957 0.01741 H_5310BN zhiguang qw 05/21/2014 17:01:46 32
| |
| 1549915 0.01412 pbwa.sh jpoland qw 05/21/2014 10:11:18 16
| |
| 1549985 0.01211 H5_298_Bil zhiguang qw 05/22/2014 09:32:34 32
| |
| 1549987 0.00917 F_1VII khlee qw 05/22/2014 10:40:49 24
| |
| 1549988 0.00917 C_1VII khlee qw 05/22/2014 10:40:59 24
| |
| 1550046 0.00239 ni_bulk songliu qw 05/22/2014 15:47:57 8
| |
| 1489958 0.00000 align liu3zhen hqw 05/12/2014 17:55:43 128
| |
| | |
| The column I want you to pay attention to first is the 'state'. The two most common statuses you'll see are 'r' ('Running') and 'qw' ('Queued and Waiting'). ''Generally speaking'', those jobs that are higher on the list will start running before the ones lower on the list. This way you can see your relative position. Another useful tool is to see how busy Beocat is. [http://gangia.beocat.cis.ksu.edu/ http://gangia.beocat.cis.ksu.edu/] will give you those statistics. Depending on the resources you ask for, a job you submit may start immediately or may take up to several weeks, depending on the priority of your job, the resources available, and the requested resources of the jobs ahead of you in the queue.
| |
| | |
| If you want to read more, continue on to our [[AdvancedSGE]] page.
| |
